Home> Products> Sawing Rope> Sawing Rope 4.8/4.9mm> Wire saw for crantite quarry 7x19-4.8 4.9mm
Wire saw for crantite quarry 7x19-4.8 4.9mm
Wire saw for crantite quarry 7x19-4.8 4.9mm
Wire saw for crantite quarry 7x19-4.8 4.9mm
Wire saw for crantite quarry 7x19-4.8 4.9mm
Wire saw for crantite quarry 7x19-4.8 4.9mm

Wire saw for crantite quarry 7x19-4.8 4.9mm

$0.51≥20000Meter

Payment Type:T/T
Incoterm:FOB
Min. Order:20000 Meter
Transportation:Ocean,Express,Air,Land
Port:SHANGHAI,NINGBO,GUANGZHOU
Product Attributes

Model No.7x19-4.8/4.9mm

BrandYUNFENG

StandardGb

Place Of OriginChina

SpeciesGalvanized

ApplicationManufacturing

Whether AlloyNon-Alloy

Tolerance±3%

Processing ServiceBending

Specification7X19

Material TypeGalvanized steel wire rope

SurfaceCOPPER PLATED

Diameter (mm)*4.8/4.9MM

MaterialCarbon steel

ApplicationQuarring

Minimum Breaking Load22.5KN

Packaging & Delivery
Selling Units : Meter
Package Type : WOODEN REEL
Picture Example :

The file is encrypted. Please fill in the following information to continue accessing it

wire saw 3.5mm
Product Description
A wire saw is a type of cutting tool that uses a wire or cable with diamond beads or segments attached to it. It is commonly used in the quarrying industry for cutting hard materials such as granite, marble, and sandstone.

To use a wire saw in a crantite quarry, the following steps can be followed:

1. Select the appropriate wire saw for the specific crantite quarry material and conditions. Ensure that the wire saw has the necessary strength and durability to withstand the cutting process.

2. Set up the wire saw machine or equipment at the desired location in the quarry. The machine should be securely anchored to prevent any movement during the cutting process.

3. Attach the diamond wire or cable to the wire saw machine. Make sure that the wire is properly tensioned and aligned for optimal cutting performance.

4. Start the wire saw machine and slowly guide the wire into the crantite quarry material. Apply steady pressure to ensure a consistent and even cutting motion.

5. Move the wire saw along the desired cutting path, following the predetermined lines or patterns for extracting crantite blocks or slabs.

6. Periodically check the condition of the wire and adjust the tension if necessary. Replace the wire or diamond beads as needed to maintain cutting efficiency.

7. Continue the cutting process until the desired crantite blocks or slabs are obtained. Take precautions to ensure safety during the operation, such as wearing appropriate protective gear and following all safety guidelines.

8. Once the cutting is complete, carefully remove the crantite blocks or slabs from the quarry using appropriate lifting equipment.

It is important to note that the specific steps and equipment may vary depending on the type of wire saw machine and the specific requirements of the crantite quarry. It is recommended to consult the manufacturer's instructions and seek professional guidance if needed.


Our rope (such as Galfan Steel Wire Rope, steel Wire Rope For Textile Machine, multi wire rope for stone, GYM Cable) is in high quality. Welcome to copperate.

Home> Products> Sawing Rope> Sawing Rope 4.8/4.9mm> Wire saw for crantite quarry 7x19-4.8 4.9mm
Send Inquiry
*
*

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send